Used Forklifts Canada - A narrow aisle forklift is utilized for lowering and lifting loaded pallets from high storage spaces. This particular type is recommended for work environments with narrow spaces between aisles, like retail establishments or warehouses. The forklift has small, solid rubber tires that make maneuvering very simple. Usually, the operator of this specific kind of forklift stands up in a small cockpit. The stand-up design enables the narrow aisle forklift to be as short and narrow as possible. A stand-up cockpit forklift normally has three tires: two in the front, and one in the back. This configuration enables for easy and fast maneuvering. There are some models of these forklifts that are available with a sit-down cockpit. The lift attachment could pivot to the sides, allowing the lift to be operated without the operator having to reposition the whole machine. The sit-down version normally has four wheels. An electric engine is utilized to power many narrow aisle forklifts. Electric-powered machines do not produce exhaust fumes and are quiet, making them the suitable alternative for closed areas like for example retail spaces. Some lifts come with a diesel engine or a gas engine. Nevertheless, the diesel version is not recommended for indoor application because it could produce exhaust and be noisy. The forklift is a material handling device utilized to lift and transport loads from one location to another. Each and every forklift part has a particular function. Different parts can be utilized to move the load either horizontally or vertically. The mast refers to all the components which lift and lower the load. There are various types of masts used for raising loads to various heights: duplex, triplex, quad and simplex. There are four various ways you could power a forklift: gas, electric, diesel and propane. The battery is located inside the cab under the seat. The propane tank is situated on the back of the truck. The fuel tank on diesel and gas forklifts is underneath the back of the truck. The cab is situated in the middle of the truck. This is where the operator sits and accesses all the controls and informational gauges. The gas pedal, steering wheel, lifting controls, tilting controls and brake are all located in the cab. The frame of the truck carries all the largest components of the forklift, like the counterweights, which are located at the rear in order to prevent the truck from tipping when loaded. The frame consists of the overhead guard that protects the operator. The undercarriage holds the wheels, driveshaft and axles. Hyster is an industry leader in the materials handling industry that has been in business for over eighty years. However, it began as a manufacturer of lifting equipment and winches. Most of its production was concentrated in the northwest United States and dealt mostly with the timber and logging industry. A couple years after the first forklift trucks were invented Hyster became synonymous with quality production. Over the previous 80 years Hyster has continued to expand and develop its product line. The growth of its products coupled with its wish to stay service oriented has allowed Hyster to grow into the intercontinental participant it is at the moment. All Toyota machines and components manufactured within North America adhere to the International Organization for Standardization or ISO 14001 standard. The Columbus TIEM plant has been honored on many occasions for its devotion to relentless development and its environmentally friendly systems. It is the first and only producer to offer EPA and CARB-certified Compressed Natural Gas powered lift trucks on the market. For example, the Toyota 8-Series IC lift trucks emit 70 percent fewer smog forming emissions than the current centralized EPA standards and have complied with California’s strict emission standards and regulations. The business Jungheinrich is a European leader for system technology and is now a leading producer and worldwide supplier of material flow technology, warehouse technology and lift trucks. The business offers a complete product assortment of material handling equipment and rack systems along with services from a manufacturing logistics service provider. Jungheinrich is the 3rd largest supplier of lift truck trucks used for the materials handling business. They realized their incredible growth due mostly to their quality lift truck designs and innovative technology. They have developed a host of productivity and ergonomic enhancements for their fleet and introduced a proprietary 3-phase AC motor and controller technology. Jungheinrich has over 300 dealer and service facilities strategically located all around Mexico, Canada and the United States. One of the companies main objective is to simplify their customers material handling needs by providing customized solutions. Jungheinrich manufactures a lot of forklifts in their line of products, lift trucks which are intended to work outstandingly in various applications. These machinery are well-suited to complete tasks in a diverse environment. They can do food processing, order picking, stacking and warehousing applications with ease.
Terex: Terex Knuckle Boom Lifts Canada - Telescoping Boom Lifts Telescopic booms are big industrial machines designed with a straight boom arm that is extendable. The boom is typically located on a rotating turntable. The telescoping boom lifts are normally used for jobs which need tasks to be performed at heights which exceed other kinds of lifts. Like for instance, employees are able to perform exterior repairs or renovations on medium sized buildings but using these lifts instead of having the additional work of setting up a pulley system or an outside elevator. The boom lift is only designed to hold one individual. These buckets are more suitable to particular tasks such as electrical repair, as opposed to general maintenance or window washing. These lifts are available with both outdoor and indoor tires and are available in gas or electric configurations. Scissor Lifts Scissor lifts are named for the cross-braces underneath the work platform. These braces squeeze together in order to push the platform straight up. Because these machinery must be directly positioned beneath the work site, as opposed to boom lifts, these units are way more limited in their use. Scissor lifts do, however, offer larger platforms that enable the operator controlling the lift to access a bigger work surface once the lift is raised. With scissor lifts, all-terrain capability is less of an issue with these types of equipment, because they should sit on flat ground in order to be used. Scissor lifts are ideal for being used for window installation or cladding, since they provide the employees with the desired mobility; they are also a good alternative for exterior repairs or window cleaning applications. Boom Trucks vs. Cranes Bucket trucks, cherry pickers and boom trucks each refer to the class a type of utility vehicle utilized specially for vertical work. Typically, these trucks have a cab. It is here where the operator sits and controls the machine. There is a bucket for where the employee could stand in addition to an actuator arm for raising the boom and a winch for carrying. Cherry pickers could lift workers up to heights that were previously inaccessible. The cranes function is to raise both heavy materials and equipment for one place to another. There are a variety of different crane types that could carry out a variety of purposes. Both of these different kinds of machines excel at various tasks and are great for particular applications and finishing certain tasks.
TCM: TCM Lift Truck Canada - The forklift has become an important equipment specializing in the lifting and moving of heavy cargo. These machinery have 2 forks known as blades or tines, situated on the front of the equipment. These blades could pick up things that weigh as much as thousands of pounds. The steel forks could move up and downwards, forward and backward so as to handle the moving cargo. The lift truck is a very important piece of equipment used in warehouse applications, in dockside settings, and utilized quite often in agriculture and on construction sites. They are used to transport heavy loads and save a lot man-power on the jobsite. Several units are powered by electricity and other units use liquid propane, diesel or gasoline. Based on the weight that should be raised, the distance between the blades could be adjusted accordingly. Types of Forklift Attachments There are numerous types of accessories, as there are a range of different lift trucks offered on the market. There are various attachments which could be installed on a forklift. For instance, there are certain attachments to help reach and lift objects easily. It is a wise idea to conduct some study before buying any kind of forklift attachment. This is very significant because utilizing a wrong or unapproved attachment could alter the lift truck lifting action. Any kind of imbalance on the forklift could result in a disastrous situation like for example a forklift overturn or some other potential misfortune. As there are a lot of various kinds of attachments available on the market, be certain the one you select is compatible with the type of forklift you are going to install it on. Normally, the lift truck has hoist attachments which are equipped with a hook. These mechanisms help to pick up heavy and large things. Additionally, there are several special attachments which are designed to carry a specific shaped object, such as the drum grabber attachment. Personnel platform attachments are one more common type available on the market. Other common kinds of attachments comprise: rotator, scales, side-shifter and multipurpose clamps. Utilizing a wider variety of attachments can change your machine into a multi-purpose equipment. These attachments could eventually, help save your company money by not having to purchase separate machinery to carry out these smaller tasks. Lots of attachments could be rented for a day or longer so if there is a temporary need to utilize an attachment on a less than regular basis, this could be the best alternative.
Toyota: Toyota Deisel Forklifts Canada - Sakichi Toyoda was the first founder of the Toyota Industries Corporation or also referred to as TICO in 1926. TICO has expanded the scope of its business domains ever since the companies beginning to promote diversification, like logistic solutions, material handling equipment, electronics, textile equipment and machinery, engines, vehicles, automobiles and car air-conditioning compressors. About Toyota Material Handling, U.S.A. Inc. The TMHU has ever since the year 2002, been the supplier for North America's top selling forklift. In addition to the wide range of high-quality forklifts sold under the brand Toyota, the company has extended their industrial equipment solutions to comprise Automated Guided Vehicles and tow tractors. TMHU is celebrating its 45th year in industry within North America. Excellence is the hallmark of the Toyota Production System. It is practiced at each Toyota manufacturing facilities like TIEM. During the year 2011, TIEM was named a North American Best Plant by Industry Weekly magazine. TIEM is a member of the National Safety Council and follows the ISO 14001 standard set by the International Organization for Standardization. Since it started in the year 1990, TIEM has manufactured more than 400,000 Toyota forklifts. Toyota is internationally recognized for being dedicated to quality in customer service. This devotion has been extended all over Canada and the US. There are more than 70 authorized Toyota Industrial Equipment dealers and all around North America there are over 220 dealership locations. Toyota dealers are well skilled and capable of providing comprehensive support and client service. They offer one-stop shopping for both second-hand and new forklifts, fleet servicing, rentals, service and parts and financing. The company of Toyota has been dedicated to offering excellent quality care. They can deliver on short notice any replacement part to help minimize any possible downtime. Toyota dealers are happy to deal with any questions or concerns set forth by their customers and are also a fantastic resource if you are thinking of becoming a potential customer and must determine the right kind of equipment for your particular requirements. The dealerships offer a wide array of new, used and refurbished machines with a purpose to provide you with the right options. Renting equipment is an ideal way to try before make a purchase. This way you could check the machinery in the environment you will be using it in to see if it will be right and sufficient. Toyota offers plenty of information on their business website. Visit your local dealership to have any questions answered, see the newest equipment and experience their product line first hand.
Mitsubishi: Mitsubishi Dual Fuel Forklifts Canada - Hybrid technology on Mitsubishi's dual fuel lift trucks have remain mostly electric and use small internal combustion engines. The dual fuel models are really preferred by many people, as opposed to pure IC or internal combustion models. The dual fuel units approximately cost the same as electric lifts, although you could really help the natural environment, as well as enjoy a significant decrease in fuel costs. As long as you have the correct ventilation, for instance working outside, IC engine powered lifts could really be terrific. Normally, IC forklifts cost fairly a bit less compared to the electric or dual fuel versions. Additionally, these models are usually cost a lot less in the regards of repairing if anything goes wrong. There are 5 main lift truck manufacturers who can provide you with all of the flexible options and tools required if you need to purchase one of these really powerful machines. Usually, the forks on the machine are frequently taken for granted or disregarded. These are vital pieces of equipment which are vital components of the machinery. Used and sold in pairs, forklift forks are long metal objects that connect to the machinery and provide the durable and strong surface which is capable of nimbly carrying huge items. Primarily utilized in lift trucks to relocate crates, lift trucks are also utilized in docks, retail stores, smaller shops and numerous applications. It is vital to consider size, weight capacity and attachment method when you have decided to purchase a brand new fork set. Forks can vary from $400 to $700 for a new set. These prices are largely determined on the fork pair's weight and size, since they are available in various sizes. Due to their heavy and awkward size, shipping could be extremely costly and therefore, it is recommended to find a local retailer when thinking about making a new purchase. When considering new forklift forks, it is essential to take safety into consideration. The forks are often transporting dangerous and heavy cargo. The ones with a good safety record and solid construction are the highest recommended. It is really important to check all of your current forklift forks in your fleet. For example, if you detect any sign of decay or wear, considering replacements would hopefully become a top priority.
Manitou: Manitou 4 Wheel Drive Forklift Canada - Vertical Masted Lift Truck The vertical masted or straight masted lift truck is a great equipment designed for your material handling requirements. These models are a great option for times where stability and maneuverability are important to your application. Manitou's lift trucks have become pioneers of the masted models, that have been developed over many years of proven job performance and proven reliability. These kinds of equipment are designed to function successfully in even the most extreme environments and work all around the globe. The Manitou M Series masted forklifts have been designed from the start as a true rough terrain lift truck. They have been carefully designed from the ground up to be tough and dependable. Several of the priority concerns covered in the development was basic maintenance and operator comfort. The M Series is offered in a variety of configurations in order to offer customers an excellent choice of machine. The Manitou M Series of masted lift trucks emerged on the market and from the start were being marketed as a real rough terrain lift truck. The operator's comfort and basic maintenance were amongst the important problems that were kept in mind in the engineering and development of this specific equipment. The M Series is available in many configurations in order to provide our clients the suitable equipment to suit their diverse applications. The smaller version Manitou lift trucks are part of the companies semi-industrial variety. They offer excellent handling, compact maneuverability, unequaled comfort, simple, accessible maintenance and supreme traction. This range is the right choice for applications which require more than what the standard forklift could provide. Truck Mounted Lift Truck Manitou's Manitransit Series offered a series of truck mounted forklifts which have revolutionized on-site offloading procedures. The TMT Series offers comfortable operation, industry-exclusive telescopic boom design and innovative technology. This series provides greater freedom of movement and hence, lessens the overall expenses that are normally connected with on-site handling. The long boom unit option allows for better access to every load from the trailer's same side. This feature helps to reduce the delivery times to residential roads. This boom design as a result eliminates complicated hydraulic/mechanical systems and the moving of masts needed on similar competitive models. The 4-way TMT 55 unit has incorporated all these features above while also providing a unique 4-way steering capability. The wheels pivot hydraulically 90 degrees allowing side-to-side movement to occur. This provides drivers the chance to unload long cargo within tight areas. These lift trucks provide stability and incomparable simplicity of design. These kinds of machinery create less downtime to their clients because the design features minimize maintenance requirements.
Raymond: Raymond Order Picker Forklifts Canada - Gain the Competitive Advantage with Raymond Raymond's order pickers come in 36 Volt and 24 Volt models. They are a great choice for any business as they are really versatile machines which could reach heights up to 390 inches. Order Pickers featuring our exclusive ACR System offer faster and smoother operation with reduced ownership costs and also less downtime. Each of these trucks provide variable lift and lower alternatives, power steering with auto-steer centering in order to increase productivity by improving load handling, as well as simultaneous function control handles. You will find different options and configurations so that they can exceed all your requirements. Raymond focuses on producing material handling solutions the food processing business, which is one of the most vital industries in our current worldwide system. There is much variety among food processing machinery offered by the material handling industry. This industry reflects the enormous diversity within the food supply chain. Whether receiving raw ingredients or materials, or getting ready to ship out of your distribution center, lift trucks which are manufactured to meet the throughput and production requirements of your high-velocity warehouse are definitely a must. On the processing floor as well, you need machinery which is capable of being exposed to a range of difficult settings. Like for example, it must be resilient enough to withstand brine, caustics, and other fluids. The machinery has to be able to stand frequent wash downs and disinfecting. Raymond provides the most complete variety of technological solutions and the best range of electrical forklifts within the food processing business. These equipment are mad to satisfy the diverse processing environments regardless of what your specific needs are. Extreme solutions are required by harsh and demanding environments. There is no other material handling business who comprehends the tough workloads and situations you put your lift trucks through better than Raymond.
Nissan: Nissan Diesel Forklift Canada - Whether you are thinking of expanding your business fleet of forklifts or if you are just beginning with your very first lift truck, the number of decisions that go into selecting a used or new forklift could really be overwhelming. There is such a wide array of options such as internal combustion or IC engines, electric models or the newest hybrid lifts. Taking time to know all your requirements and get what you would like out of your machine in order to facilitate unloading and loading applications for your warehouse or dock is essential. Of course a huge consideration like with the majority of big purchases is the upfront cost. Be sure to think about the long term expense associated with utilizing your forklift. For example, bear in mind that your largest expense in this specific category is going to be the expense to fuel and run your lift truck. Among the existing internal combustion forklifts available on the market today, the diesel unit tends to provide some of the least expensive operating and fuel costs. These types of forklifts can easily out-lift and out-power your average electric forklift. There are many pros and cons associated with diesel forklifts just like there are with all lift truck models. The following is a brief buying guide for diesel lift truck units in order to help determine the model best for your requirements and help you cut through the confusion. If you know about the possible pitfalls, you would be prepared to make an educated purchase. More than likely the largest advantage enjoyed with diesel forklifts is their low operating cost. Usually, diesel is the cheapest fuel option for internal combustion lifts. Even if electric lifts are less expensive in the long run, they don't necessarily work the best for outdoor applications. Although diesel forklifts are ideal for outdoor environments, they are however not used properly indoors. The emissions from a diesel units could be hazardous if not correctly ventilated in an indoor warehouse. In addition, diesel forklifts are significantly louder than their emission-free electric counterparts.
Trek: Trek Sweepers Canada - TREK Cleaning Machines is a maker of cleaning machinery who have a passion for the cleaning industry. The company's creative nature is a reflection of the business founder's huge entrepreneurial style. Chris Knowlton, Jim Hartsock and Bob O'Hara together have 60 years combined experience in successfully developing, manufacturing, supporting and selling really efficient machinery which provide supreme value to all their clients. TREK is committed to new design ideas and extremely committed to quality. All these corporate values are reflected in their product development and individual machines. TREK Cleaning Machines provides a variety of products that provide reasonable production gains to their clients as well as energize their dealer partners. Energy, commitment and dedication to customer satisfaction resonate with every equipment. Team TREK is keen on dealing with the harder tasks and new challenges. The company is proud to introduce their breakthrough Torsion scrubber line of cleaners. The Torsion vision project developed and was motivated from the company's unique comprehension of operator's skills and needs, specific cleaning applications, and the owner's strong desire to greatly decrease their costs through productivity gains. TREK, along with their dealer-partners are dedicated to having both parts support and technical support whenever you need it. This commitment to providing great service is at the core of their customer service culture. Making certain that your cleaning machinery is up and running on a daily basis is essential to the customers and to TREK as well. The corporation offers industry leading technology in order to deliver reliable equipment to reduce your cleaning expenses. TREK has become a preferred choice for many different businesses. On the market today, there are a lot of manufacturers that spend much effort in developing user-friendly cleaning machines at a great price. In an effort to develop such equipment, TREK Cleaning Machines have been a popular producer of excellent sweepers and scrubbers for many years. Recently, the company launched a full line of industrial floor sweepers and floor scrubbers with a focus on increased production and on extremely competitive pricing. TREK was initially founded by industry veterans. They know the problems and concerns that face manufacturing facilities. The Torsion SUR or Stand- Up Rider Scrubber was made together with the Radial Sweeper. The TREK Torsion SUR is an articulated scrubber machine. This means that it is uniquely made with 2 sections which utilize a pivoting joint to connect them. This specific design allows the Torsion SUR TB6 scrubber to provide a turning freedom of 150 degrees, improved handling, and increased maneuverability. These features as well as the 60-gallon tanks, that come standard equipped, means an increased production of up to 100 percent.
Caterpillar: Caterpillar Telehandler Forklifts Canada - Telescopic handlers are a bit similar to forklifts. It possesses one telescopic boom that extends both forwards and upwards from the truck, and a counterweight in the rear. It functions more like a crane than a forklift. The boom could be equipped with a variety of attachments. The most common attachment is pallet forks, but the operator can also attach a muck grab, lift table or bucket. Also called a telehandler, this particular kind of equipment is commonly used in industry and agriculture. A telehandler is often used to move loads to and from places which will be hard for a conventional forklift to access. Telehandlers are frequently used to unload pallets from within a trailer. They are also more practical compared to a crane for carrying loads onto other high areas and rooftops. There is only one major limitation in utilizing telehandlers. Even with rear counterweights, the weight-bearing boom could cause the equipment to destabilize as it extends. Hence, the lifting capacity decreases as the distance between the center of the load and the front of the wheels increases. The Matbro company developed telehandlers in England. Their design was based on articulated cross country forklifts used in forestry. Early versions had a centrally mounted boom on the front and a driver's cab on the back section, but today the design which is most popular has a strong chassis with a side cab and rear mounted boom.
Yale: Yale Warehouse Forklifts Canada - Yale Narrow Aisle Trucks The Narrow Aisle forklifts produced by Yale have been designed and made with all the particular specifications and ergonomic comforts any operator will need. Yale makes sure they make and engineer narrow aisle trucks that meet the various requirements of industries and their certain applications. Yale forklifts provide efficient drive motors that are proven for their dependability, robustness and supreme performance. Moreover, the Yale Hi-Vis masts offer innovative engineering for unsurpassed visibility and solid construction. Very Narrow Aisle This type of narrow aisle forklift has been designed intentionally to maximize storage density. Yale' s very narrow aisle trucks are especially designed for case picking and pallet handling applications that range from 16 to 55 ft. The company features the NTA for high density warehousing conditions that require maximum throughput applications. NTA Productivity Enhancements Electronically Programmable Pantograph: Electronically programmable pantographs offer great stroke lengths. This particular feature eliminates the time-consuming "double-biting" at pick up and deposit stations. Motorized Pallet Trucks: The Motorized Pallet Trucks are also referred to as walkie trucks, rider pallet trucks or walkie-riders. The operators walk behind the walkie version that is useful for moving loads in small places. The rider and walkie-rider units are very useful for transporting loads over longer distances. These units are designed so that the operator could stand on a small platform. AC Motor Technology: The AC Motor Technology has responsive directional changes, provides rapid and smooth acceleration and has a high starting torque. Smart-Glide Height Sensing System: The Smart-Glide Height Sensing System provides maximum travel speed at various fork heights. It also offers step-less speed control by its ability to optimize travel speed. Tri & Quad Form Mast: This stiff mast minimizes deflection and provides operator stability. CANbus Controller: The CANbus controller enables for reduced wiring by as much as 40%, while electrical connections are reduced by 25 percent. This helps to offer better visibility through the mast and improved overall dependability. Auto Deceleration System: The Auto Deceleration System improves productivity and reduces operator exhaustion by eliminating the need to manually utilize the service brake. Thermal Management System: The Thermal Management System adjusts truck performance and continually monitors component temperature. This enables trucks to run significantly cooler and longer. 180° Rotating Turret Head: This especially engineered rotating turret head enables the operator to easily service both sides of the aisle and greatly maximizes storage density.
Genie: Genie Electric Boom Lifts Canada - Genie aerial work platforms are user-friendly, versatile, efficient machinery that are a cost effective solution for numerous business applications. Along with lightweight design, easy setup, versatility of use, and increased productivity, Genie products come with a team of experts who are always available to help you with continued support, reducing the chance of prolonged down time. The compact design and light weight of Genie aerial work platforms make them the right choice for a wide variety of job sites from large to small warehouses, schools to small businesses. Genie aerial work platforms are suitable for both small and big construction jobs and job locations, even work on high rise buildings. Genie's objective is to make your business more productive utilizing economical solutions suitable to your work site's needs. Many accessories, features, and options are available to make the equipment tailored to your requirements. Features on numerous units are flexible and offer what your business needs at a price which works for you. Added extras are that Genie machinery are transported and moved easily, and they are made to be lightweight, compact, and really easy to maneuver. One individual could set up a machinery with ease and be ready to work in a very short time. Between the engineers, dealers and Genie units, this team is committed to keeping your business up and running, increasing your businesses production, and providing you with the best client service within the business. We are always available to answer your questions or provide support for Genie machines which you can own already, so never hesitate to let us help you.
Taylor: Taylor Reach Stackers Canada - TS Series Reach Stackers Taylor has set a new standard with their latest reach stacker container handlers. Their latest TS-9972 Reach Stacker is a user friendly, really comfortable and durable machinery. The TS-9972 has all of the reliability and comfort which you would definitely find from machines manufactured by Taylor. The TS-1068 Reach Stacker has been meticulously engineered and designed for the intermodal yard and complete rail terminal. Every unit is built on an all welded high-strength steel frame that could provide easy access to every service point and features easy access covers, hinged doors. In the 4th, 3rd, 2nd and 1st tiers, the TS-9972 offers a first row rated capacity of 99,000. In the 5th tiers, these units are 9.5 foot containers with 90,400 pounds capacities. 3-Point Multi-Purpose Hook Attachment The 3-Point Multi-Purpose Hook Attachment uses 3 detachable industrial high-strength hooks. These are the key to this units' extreme versatility. You can outfit the hook attachment with an individual device by removing the necessary hooks. This type of equipment is able to really help you accomplish the job. Magnetic Attachment The Magnetic Attachment mounts to the 3-Point Hook attachment. It mounts by removing the outermost hook and replacing the heavy-duty pin. The magnetic attachment allows drivers to move magnetic things and easily transport steel plates. Coil Handling Attachment The Coil Handling Attachment works by mounting to the 3-Point Hook attachment by removing the center hook and replacing the heavy-duty pin. That is all that the process entails. The coil handling attachment is made to pick up supplies like coiled rolls and other things. This kind of machinery offers drivers utmost visibility.
Comansa: Comansa Self Erect Cranes Canada - Linden Comansa has made more than 16,000 cranes ever since the year 1963. The first Linden 8000 cranes were manufactured by Linden-Alimak, in the year 1977 in Sweden. These units are considered to be amongst the first Flat-Top cranes used for construction purposes. The actual concept of Flat-Top did not evolve until the Linden Comansa company implemented this particular description during the early part of the 1990s. The term Flat-Top crane is now a universally excepted term. The flat top crane design is still manufactured by the company. They also manufacture the LC 500 Series, that is an update from their well-known NT Series. Comansa introduced the newest crane technology and the flat-top design. This series features a range of flat-top cranes made up of 4 kinds. These flat-top cranes have lengths from 35 meters up to 50 meters and offer a maximum jib-end load of one ton. Starting in the summer of the year 2008, the LC 1100 Series offers a lot of innovations in comparison to the previous crane series that Linden Comansa offers. A few of the biggest changes are outlined below. These adaptations and improvements made to the design have greatly enhanced these machines' comfort, capacity and efficiency, making them a really sought after piece of machine. The technology has grown and the company takes pride in offering their customers a durable, dependable, quality machinery that is really successful in many different settings. The new LC 1100 series is easier erect, while keeping the Flat-Top system in place. This is due in part because the slewing and hoisting systems, along with the electric cabinets are pre-installed at the factory in the cat head and then delivered in this fashion to the customer. Additionally, in comparison to the prior series, the slewing structure's lesser weight makes the crane a lot easier to erect overall.
JLG: JLG Articulated Manlifts Canada - These types of equipment provide a wide range of applications that depends on the function and the industry itself. There are various kinds of lifts used for for tight spaces. These specifically engineered machinery can rise 36 feet and extend 21 feet. There are outdoor lifts existing on the market which offer a 69-foot horizontal reach and rise more than 140 feet. The electric man lift is a different popular kind of lifts. Electric units are utilized almost exclusively inside and on smooth surface flooring. Typically these have a slim body style so as to allow access into narrow spaces. The engine-powered man lifts usually operate on propane, gas, or diesel. These models are mainly used for outdoor jobsites and for heavier applications. The electric man lift is best suited for indoor settings and are excellent alternatives for warehouses. This is due to the fact that man lifts come in lots of sizes, most are small enough to fit in tight spaces, fit through doorways, and could traverse barriers or blockages, while producing to air pollution. They often help to maximize space on high shelving units and could reach overhead work areas with ease. Certain units of electric lifts can complete targeted and extremely precise maneuvers by utilizing a rotating platform. The electric drive uses rechargeable batteries which typically could be recharged overnight. Numerous companies purchase extra batteries so there could be an extra battery charging at all times to be switched out immediately when required and that downtime is minimized. Articulating man lifts which are engine powered could be designed to function on many kinds of terrain. A lot of these units have been equipped with legs which can hoist the lift body off its wheels. This creates a more steady and secure platform. Other models are specially designed for uneven and rough ground. Most of these lifts are capable of handling 500 pounds. In certain cases, some units could raise a 600 lb. cargo. This model could articulate 69 feet out in any direction and reach over 140 feet high. The booms can transport a worker to a work place. Once there, the driver could maneuver the machinery to have it work over or under a specific place. Man lifts designs are as broad and varied as their applications. On the market, there is an extensive variety of articulating lifts. These lifts are designed to meet the requirements of every application, situation and circumstances. One manufacturer builds lifts particularly for dangerous environments like underground tunnels, grain-processing plants and petro-chemical plants. These types of lifts are ideal for working in environments where there is a risk of dust or explosive gases during extraordinary or ordinary operations.
Daewoo: Daewoo Warehouse Forklifts Canada - Definition of Forklift Classes The forklift is utilized in numerous retail and warehouse environments for a variety of daily task, like lifting heavy merchandise, delivering loads of goods and stocking shelves. Based on the Industrial Truck Association there are eight classes of forklift. The machines are classified according to kind of engine or motor, type of tires, and the way the machine is steered. Forklifts are also called lift trucks. Class I forklifts - Electric Motor Forklifts This class includes all standard electric motor lift trucks. Kinds of Class I forklift comprise the sit-down, three-wheeled varieties that are often utilized to transport pallets of mulch at home goods stores. Class II forklifts - Narrow Aisle Electric Motor Lift Trucks These trucks do not require much space to operate. Class II trucks include forklifts with swinging masts and side-loading models. Class III forklifts - Electric Motor Hand Trucks Class IV forklifts - Internal Combustion Engine Forklifts These trucks have engines similar to those found in cars. They come with either solid tires or cushion tires. usually the back of the truck has a counterweight in order to make the vehicle more stable. Class V forklifts are like Class IV forklifts since both have IC engines and are usually counterbalanced. The difference is in the tire. Class V trucks come with pneumatic or radial tires. Tractors Class VI forklifts - Towing Tractor Lift Trucks These trucks are sit-down tractors that could lift heavy loads and pull loads weighing more than 450 kilograms. These trucks can are available with either an an internal combustion engine or an electric motor. Class VII lift trucks - Rough Terrain Vehicles This class of lift truck has pneumatic tires and internal combustion engines. They are usually employed in logging, agriculture and construction. These trucks are great for worksites where the ground is rough and uneven and riddled with debris. Class VIII forklifts - Manual Lift Trucks These trucks are hand pallet lift trucks operated by a person who either pushes or pulls the vehicle. The forks are normally operated hydraulically, and have a low maximum lift height. This class consists of personnel and burden carriers.
Hyster: Hyster End Control Forklifts Canada - At Hyster, we carry a diverse variety of lift trucks to meet all of your application needs. For instance, the J45-70XN includes the Drop Battery Box and unique component design which allows this unit to utilize pneumatic tires. The use of the pneumatic tires allows for a smoother ride because of reduced vibrations even if the surfaces are bumpy. This kind of electric truck has 4,500 to 7,000 pound capacities for both outdoor and indoor work. These units' electric motor allows them to be a great zero emissions alternatives to other engines. Hyster provides a series of four wheel lift trucks and three wheel trucks to suit work areas which require a tight turning radius. The J30-40XNT model is a three wheel lift truck that surpasses nearly all other lift trucks in its ability to turn sharp corners and manoeuvre through confined spaces. This line of forklifts is ideal in congested or limited work spaces, making both unloading and loading easier and safer. This lift truck also features dual steering wheels to give an even more stable and smooth ride. The J30-40XN model is a four wheel forklift which has manoeuvrability really similar to a three wheel forklift. The four wheel design on this model offers a Zero Turning Radius axle that is usually a lot more comfortable if longer distances need to be covered. A lot of features come standard on all Hyster lift trucks, but there are a lot of optional features available as well. The operator selectable performance mode option enables the driver set the performance level needed on a job to job basis. Further, it could allow a supervisor or manager to set the maximum performance level if safety could be an issue, like for example helping the operator to learn in a more controlled way if a new driver is learning how to use the forklift. In certain environments, enclosed operator cabs might be a good alternative for protecting employees from harsh conditions. Sound proofing, an emergency exit and tempered glass help to keep the worker safe. Panoramic and dual rear view mirrors are available to enhance driver visibility, particularly of the tail swing area and the area behind the lift truck. Impact monitors could be installed that disable the unit and require a manager or supervisor to re-enable the truck. This could help to make certain that workers are safely operating machines. To prevent lift trucks from rolling when the driver intends to stop, an auto park brake is an optional feature that could be added. The park brake automatically applies itself when the unit comes to a full stop. For different applications, some ratings might be needed. UL GS, LPS, DS underwriter laboratory rating label with approved construction standard tells the operator that the unit has been outfitted with added resistance to spark creation. If there is a concern, there is a mechanical main battery disconnect. An EE UL rating means that the lift truck could be used in work sites where sparks or arcs from electrical equipment might ignite airborne deposits.
MEC: MEC Rough Terrain Scissor Lifts Canada - Disadvantages of Using Scissor Lifts A scissor lift is a specific type of mobile scaffolding. This wheel-mounted machine provides power to a work platform which moves down and up. The lift could be powered by propane, electricity, diesel or gas. Scissor lifts are characterized by a variety of scissor-like joints that elevate the machinery by expanding and collapsing. Many safety features are built into scissor lifts nowadays, specially the newer models. Like with any safety features, they might not be able to guarantee safety and some features could be manually overridden by operators or they could occasionally malfunction. Inadvertent Elevation Commonly, construction workers use scissor lifts to work on higher aspects of the jobsites or on ceilings. The workers will need to lift the platforms just to right below the level of the ceiling. The problem with accidental elevation could take place if the workers inadvertently bump into the elevation controls while working. In the ceiling scenario, the controls might be accidentally activated and the platform could rise up and accidentally crush them into the ceiling. Electrocution Another way employees need to be extremely careful is to be certain they know the environment they are in while using the machine in order to ensure they don't unintentionally electrocute themselves. If, for example, the operator makes direct contact with or inadvertently touches an induction field or an electrical conductor, tragic outcome could occur. Lateral Loads It is essential to know the loading limitations while using the scissor lift. These limitations will be labelled in the scissor lift guidebook. Mis-loading the platform could cause extremely terrible consequences. A lateral-load is amongst the potential problems which can take place if the entire lift overturns. This situation happens when a heavy material or tool such as a concrete slab that hangs over the scissor lift platform's side, causing the entire equipment to become unbalanced at once and greatly susceptible to tipping over dangerously.
Jungheinrich: Jungheinrich Narrow Aisle Forklifts Canada - Below are add-ons that are useful for narrow aisle forklifts: Side shift: Side shift is an option which allows the movement of the load laterally without having to move the model. This enables loads to be precisely positioned. Tilt mast: The optional tilt mast enables the forks to shift both backwards and forwards. This is great in cases where loads aren't completely level. To gain more stability while moving a truck that is loaded, the mast can be tilted back. Extendable forks: The option of extendable forks helps the "reach" of the lift truck to extend for stacking pallets one in front of the other, referred to as "double-deep" loading. Operator platforms: Several NA lift trucks have operator platforms which could raise and lower the operator while at the same time lowering and raising the forklifts forks. This provides optimum visibility and control when dealing with cargo at heights of 6 m to 9 m. Lift Truck on a Ramp Forklift drivers should be correctly trained on the machines. They should be tested and licensed or certified. It is vital for anybody using a forklift to be knowledgeable about safety guidelines and issues. Drivers have to know how to adjust in cases where the load weight changes the center of gravity or on uneven surfaces. Safety measures cover the safe operation of a lift truck on a ramp, which is always occurring as the operator will usually need to drive down and up ramps to be able to unload and load containers. Tips for Operating a Lift Truck on a Ramp 1 Drive slowly while approaching a ramp and when driving down and up the ramp. The risk of mishaps is increased when driving fast because this can upset the equipment's center of gravity. 2 While not carrying a load, drive the lift truck in reverse when moving up an incline on a ramp. 3 When moving down an incline on a ramp with no load, drive forward. 4 Tilt the forks a little back to shift the center of the load to the machine's front, while moving down or up a ramp while carrying a load. 5 Drive forward up a ramp when carrying a load in order to make the load more steady.
Kalmar: Kalmar Container Handlers Canada - Performance The overall result of how well the machine's functions work together is categorized by the performance of the machine. The overall effectiveness of the equipment is determined by a combination of user-friendliness, capacity, lifting speed and visibility. The engine and the machinery working hydraulics go through extreme lifting, which puts intense demands on the machinery. The lifting factor is only a part of the operating cycle. Prior to the machinery being able to unload or load, the demands are placed on effective brakes, tight turning radius with high pulling process and precise control. All of these functions should be able to work in an optimum manner, even after heavy usage. Engine Each empty container handler is made with a straight six cylinder turbo charged engine outfitted with an intercooler. The engines are adapted to the specific working conditions of empty container handling. These conditions include high power and high torque levels at low engine speeds. The engines of current units comply with the stringent legal environmental demands which are currently within the business. The engines provide low exhaust emission levels, low noise and vibration levels, low fuel consumption characterize all engine alternatives. Transmission All container handlers have been built with really durable hydrodynamic transmission systems. For quick acceleration with a minimum of "clutch-slip" the transmission has included gearbox and torque converter. The gear changing is electrically achieved via solenoid valves. These provide 3 forward and 3 reverse gears that are controlled by means of a multifunction lever that is easily operated. Drive Axle The drive axles are engineered to handle the tough and extreme working settings in terminals and in ports. All axles have reduction in 2 stages - differential and hub reduction. These features ensure a minimum of strain on the transmission system. In addition, the drive axles are fitted with a hydraulic braking system. Service Brake System All empty container handlers have wet disc brakes with oil cooled discs that are alternately fixed to and rotating with the hub. The disc brakes are pressed together by hydraulic pressure from the brake pedal, when the brakes are engaged. This provides effective braking to the model. The system is basically maintenance free and could cope with heavy cargo over a long period of time. This system requires no need for brake adjustments and provides no fade.
Wolff: Wolff Cranes Canada - The Evolution into Hydraulics The start of WWII forced society to become more resourceful in general. Even if the development and design of cranes has changed greatly, during this specific time these machines progressed greatly. These industrial machinery changed the face of the construction industry. During 1946, the first hydraulic crane was made by F. Taylor & Sons. Their model was just utilized by the business and can not luff or slew. When it joined along with Coles in 1959, this unit opened up the doors for a 50 and 42 Series. A Morris W.D. chassis is what the mobile hydraulic crane was first placed on. The hydraulic crane by Taylor & Sons operated on a boom powered by a hydraulic pump and cylinders that were lifted and lowered by a hydraulic pump. Once the business was not able to use army vehicles as chassis for the equipment, they started production for designing their own mobile hydraulic cranes. These first machines gained a lot of praise and were heralded as incredible equipments. They were supposed to be capable of rebuilding all that was ruined by bombs in the war. The cranes were responsible for helping put together cities, countries and individual houses. Hydraulic systems became designed more and more complex. The pumps and gear systems could be powered while the trucks remained immobile. Businesses such as Hydrauliska Instustri AB made the first truck loader crane appearance offered on the market. During the year 1952, the A2 crane was introduced. This particular unit was a crane mounted on the back of Chevrolet truck. It was complete with a hooked winch and hydraulic lifting cylinders. This loader crane started a huge trend in the business. A company located within Bremen, referred to as Atlas Weyhausen started making similar versions of this particular equipment. Immediately after, cranes were becoming more advanced. Different manufacturers and businesses making the winches developed accurate telescopic booms, and the hydraulic pumps were improved and utilizing various materials in order to change the way the crane was developed.
Hyundai: Hyundai Order Picker Forklift Canada - A stock picker, also called an order picker is a machinery that is quite like a forklift. It enables the operator to use forks to raise a pallet. An order picker is also capable of lifting the operator up to higher shelves for picking some items, and this feature is something the forklift does not provide. Typically, order pickers are powered by electricity. These machines are mainly utilized in a warehouse environment. Most often they are used for moving pallets and finishing specific tasks in the shelving and stocking department. The operator of the oder picker sits up on a platform where they operate the controls. These controls help to direct the machine backwards, forwards or steer it from side to side. As soon as the operator has positioned the unit in place the blades can be raised to the required level that makes it really convenient for the operator. Like for instance, if the materials needed, are located on a shelf that the operator cannot reach, then whole platform is capable of being raised up to certain level. Due to the counterweight located at the other end, the unit remains balanced, even at higher levels. After the order has been picked, the platform is lowered back to its original position. Then the order picker can be driven to its next load. With most models, it is possible to move the order picker while the platform is raised, although, several companies may have procedures and policies in place preventing such maneuvers in the name of safety. An order picker is also able to put pallets on a shelf. Stackers and forklifts could be utilized to complete these specific jobs at several companies instead.
